Jan 9, 2024 · after updating and resetting as per instructions i am attempting to set up the zero offset. Motion, auto home, motion, z axis and then lower the axis until there is a 0. 1mm gap. The issue is that the axis won’t go below zero and the nozzle is still a couple of millimetres off the bed. Go to leveling menu and. Jul 16, 2022 · i have installed, after making an upgrade on my creality ender3v2 (creality silent mainboard 4. 2. 7 / creality sprite pro extruder kit / cr touch), the professional.
Sep 26, 2022 · here’s how to fix the cr touch not homing properly: Check the cr touch’s wiring; Check the cr touch’s plugs; Was this ever figured out? I’m having issues with mine as well except when i go to set the z offset after finding it, the print head moves when adjusting z offset for some reason. Dec 27, 2022 · if auto home works as described above, the cr touch is set up and working ok. Run auto leveling, it should complete. I just switched from a failed bl touch to the cr touch and had the same issues. I got all the offsets set and the the extruder was running in reverse. I decided to go back to the bl touch firmware. Jan 22, 2024 · what you should instead be doing is using the control panel on the printer to access the z offset menu and adjust the offset whilst printing rather than touching the bed. So below the setting for z offset is a setting to save, a setting to load, and one to reset to factory or something. Do that reset first and then set the z and save
Jan 22, 2024 · what you should instead be doing is using the control panel on the printer to access the z offset menu and adjust the offset whilst printing rather than touching the bed. So below the setting for z offset is a setting to save, a setting to load, and one to reset to factory or something. Do that reset first and then set the z and save
Will The Leak Define Chloe Roma's Future?
The Kelsey Lawrence Leak: Who's Next?
The Damania OnlyFans Leak: A Story Of Infamy